Set a Weekly Stationery Par Level for the Executive Suite

Set a Weekly Stationery Par Level for the Executive Suite

by ExecutiveAssistantAgency Editorial Team · 4 min read

How to set a weekly stationery par level for the executive suite so supplies stay ready without cluttered storage or emergency orders.

In this article
  1. Supplies run out during the week nobody checks
  2. Count what the suite actually consumes
  3. Set the par from peak demand, not average demand
  4. Choose a reorder trigger and a named owner
  5. Keep storage within the space you have
  6. Match the order to the vendor's terms
  7. Review the par every quarter

Supplies run out during the week nobody checks

Executive suites use a small set of supplies constantly: printer paper, pens, sticky notes, folders, envelopes, name badges, and the paper stock reserved for board packets. The stock usually looks fine until a last-minute printing request arrives. Then the assistant discovers that the drawer has three mismatched pens and no letterhead. A weekly par level keeps the suite ready without turning the supply closet into a warehouse.

A par level is the minimum quantity the office should hold at the start of each week. It is not a maximum and it is not a forecast. It is a simple floor that triggers a reorder before the office runs out. The document naming standard sets how files are labeled; the par level sets how the physical materials behind those files stay available.

Count what the suite actually consumes

Begin with a two-week count of the items used in the executive area. Keep a tally sheet in the supply drawer and ask the assistant, the receptionist, and the print room to mark each time an item is taken. Do not estimate from a catalog or copy the last office's list. A suite with heavy board activity may use far more paper and folders than a suite that works mostly online.

Separate consumables from durable items. Paper, pens, and labels are consumed and need a weekly par. Staplers, scissors, and trays are durable and need a replacement trigger, not a weekly count. A single list that mixes both makes the reorder decision harder. The count should be small enough to finish in five minutes, or no one will keep it current.

Set the par from peak demand, not average demand

Look at the busiest week in the count and add a small buffer. If the suite used eight reams of paper before a board meeting, a par of four will fail at the worst possible time. If the normal week uses one ream, a par of ten simply fills the closet. The right level sits above normal use and below the point where storage becomes a safety or clutter problem.

Review the par for seasonal peaks. Budget season, annual meetings, and audit weeks often increase printing and folder use. A temporary higher par during those weeks is cheaper than an overnight courier charge. Write the peak dates next to the par so a backup can see why the level changes. The pre-board calendar lock checklist is a good place to note the supplies needed for a major meeting.

Choose a reorder trigger and a named owner

The reorder trigger should be a count, not a feeling. For example, reorder paper when the closet falls below six reams, or order pens when the open box has fewer than ten. The trigger belongs on a small card taped inside the cabinet door. Anyone who takes the last item should mark the card, so the next person does not have to conduct a full audit.

Name one owner and one backup for the weekly check. The owner confirms the count every Friday and places the order before the weekend. The backup covers vacation and travel. Without a named owner, the par level becomes a suggestion that everyone assumes someone else is managing.

Keep storage within the space you have

Measure the shelf and drawer space before setting quantities. A par level that requires stacking boxes in a hallway creates a fire and access problem. Keep heavy items low, label the shelves, and leave room for incoming orders. The OSHA materials handling guidance is a useful reference for safe storage and lifting, especially when paper boxes are moved by staff who are not trained warehouse workers.

Use a first-in, first-out rotation for paper and labels so older stock is used first. Keep the printer paper in its wrapper until it is needed, and store it away from damp walls or direct sun. If the building has a central supply room, agree on how much the suite can hold and what the central room will keep. The boundary prevents duplicate orders and competing stock.

Match the order to the vendor's terms

Check the supplier's minimum order, delivery day, and case pack before setting the par. A par of five reams may be impossible to order if the vendor sells only by the case of ten. A delivery day of Tuesday means the Friday check must account for the weekend. The par should work with the vendor's rhythm, not against it.

If the office uses a purchasing card, record the approval limit and the receipt process. If the order needs a purchase order, keep the number in the supply log. A small order that bypasses procurement can cost more in reconciliation time than the supplies themselves. The GSA purchasing programs page shows how structured purchasing can work in public-sector settings, and the same discipline applies to a private office.

Review the par every quarter

At the end of each quarter, compare the par with actual use and with the number of emergency orders. A par that triggers three emergency orders is too low. A par that leaves unopened cases at the end of the quarter is too high. Adjust one or two items at a time so the change is easy to judge.

Write the new par on the cabinet card and tell the backup what changed. Keep the old card in the supply log for one quarter so the history is visible. For help building an operations calendar that keeps the executive suite ready without constant firefighting, talk to our team. A good par level is invisible: the supplies are there when someone needs them, and no one has to think about the closet.